Pioneer4you IPV V200 Box Mod by Yihi

Description

The IPV Pioneer Mod is a high quality 200W box mod brought to us by Yihi. It’s constructed from zinc alloy, anodized aluminum and ABS which provides an elegant and hard wearing design. Powered by the SX531 chipset, the IPV has a wattage range of between 5-200W and supports 2 x 18650 battery cells.

Features

• Water Resistance SX531 Chip
• Powered by Dual 18650 Battery Cells (Required Separately)
• Maximum 200W Output
• Customisable Flavour Settings
  • Soft – Starts at a lower rate of 50% and slowly increases your power
  • Normal – Starts at your exact wattage settings
  • Power – Starts above your output settings and slowly brings them down
• 0.96 TFT Display
• Requires an External Battery Charger
• 30mm 510 Connector
• 5 Digit Puff Counter
• Side Battery Magnetic Doors
• Protection Modes
  • Low Battery Protection
  • Battery Over Charge Protection
  • Time Ignition Limit protection
  • Overheat Protection
  • Short Circuit Protection
  • Reverse Polarity Protection
• Constructed from Zinc Alloy, Anodized Aluminum & ABS
• Size: 90.6mm x 48mm
• Resistance Range: 0.1-1Ω
• Voltage: 6.4V-8.4V
• Quiescent Current: <100uA

Content

• 1 x IPV V200 Box Mod
• 1 x Type C USB Cable
• 1 x User Instructions